The 0.96 Inch I2C/IIC 4pin 128*64 OLED Display Module is a compact graphic display screen designed for ultra-clear text, sensor values, graphs, and custom icons. 0.96 Inch Diagonal · 128 x 64 Pixels · 4-Pin I2C Serial Interface (VCC, GND, SCL, SDA).
The 0.96 Inch I2C/IIC 4pin 128*64 OLED Display Module is a compact graphic display screen designed for ultra-clear text, sensor values, graphs, and custom icons. With a high resolution of 128×64 pixels on a 0.96-inch screen, each pixel emits its own light, delivering high contrast, wide viewing angles, and low power consumption without needing a backlight.
Driven by the reliable SSD1306 driver IC, it communicates over a standard 4-pin I2C interface (VCC, GND, SCL, SDA), using only two signal lines to connect with microcontrollers.
It is compatible with Arduino, ESP32, Raspberry Pi, STM32, robotics, wearable tech, and general embedded DIY electronic systems.
| Type | OLED Graphic Display Module |
|---|---|
| Display Size | 0.96 Inch Diagonal |
| Resolution | 128 x 64 Pixels |
| Driver IC | SSD1306 |
| Interface | 4-Pin I2C Serial Interface (VCC, GND, SCL, SDA) |
| Operating Voltage | 3.3V – 5V DC |
| High Contrast | Self-illuminating OLED pixels (No backlight required) |
| Wide Viewing Angle | >160 degrees |
What is the operating voltage?
3.3V – 5V DC.
Which interface does it use?
4-Pin I2C Serial Interface (VCC, GND, SCL, SDA).
Is it compatible with Arduino and ESP32?
Yes. It works with Arduino, ESP32, Raspberry Pi, STM32 projects.
Can I buy the 0.96 Inch I2C/IIC 4pin 128*64 OLED Display Module in Kanpur?
Yes – buy online with delivery across India, or pick it up from the iTechBuilders store, Damodar Nagar, Kanpur.
