Complete DIY Line Following Robot kit powered by an Arduino Uno SMD, featuring dual BO motors, an L298N motor driver, IR line-tracking sensors, an acrylic chassis, and all essential assembly hardware.
The Line Following Robot Kit by iTechBuilders is a premium, guided STEM learning experience designed to take beginners, students, and hobbyists from basic hardware assembly to advanced embedded programming. Built around the high-performance Arduino Nano microcontroller, this autonomous smart car uses dual high-sensitivity infrared (IR) sensors to track black lines on white surfaces with precision.
Every iTechBuilders kit comes complete with dedicated technical support and learning resources to ensure a seamless build experience:
This versatile kit serves as a modular hardware platform. By reprogramming the included Arduino Nano and adjusting sensor configurations, students can build 4 distinct robotics projects:
| Category | Components Included | Quantity |
|---|---|---|
| Microcontroller & Electronics | Arduino Nano Board | 1 Pc |
| Arduino Nano USB Data & Programming Cable | 1 Pc | |
| L298N Dual H-Bridge Motor Driver Module | 1 Pc | |
| High-Precision IR Line Tracking Sensors | 2 Pcs | |
| 3.7V High-Capacity 18650 Li-Ion Cells | 2 Pcs | |
| Dual-Slot 18650 Battery Holder | 1 Pc | |
| Drive Mechanism & Body | Single-Shaft 60 RPM BO Motors | 2 Pcs |
| High-Grip BO Rubber Wheels | 2 Pcs | |
| Smooth-Omni Castor Wheel | 1 Pc | |
| Precision Cut Acrylic Robot Chassis | 1 Pc | |
| Wiring & Hardware Pack | Male to Male Jumper Wires | 10 Pcs |
| Male to Female Jumper Wires | 10 Pcs | |
| Female to Female Jumper Wires | 10 Pcs | |
| Cable Zip Ties | 5 Pcs | |
| Chassis Mounting Screws & Nuts Pack | 5 Sets | |
| Official iTechBuilders Branded Storage Box | 1 Pc |
| Operating Voltage | 7.4V DC (Powered by 2x 3.7V Li-ion cells) |
|---|---|
| Microcontroller Core | ATmega328P (Arduino Nano Platform) |
| Motor Control IC | L298N H-Bridge Heavy-Duty Driver |
| Sensor Detection Range | 1 cm – 3 cm (Sensitivity adjustable via onboard potentiometers) |
| Motor Output Speed | 60 RPM (High-torque configuration for stable line tracking) |
| Chassis Dimensions | 20.0 cm (L) × 15.0 cm (W) × 6.5 cm (H) |
|---|---|
| Total Package Weight | 430 g (Complete kit inside official branded box) |
Is the code provided with the kit?
Yes! Complete pre-tested Arduino Nano source code and step-by-step video setup instructions are provided via a QR code inside the box.
What if I get stuck while building the robot?
You get direct 1-on-1 live expert support from the iTechBuilders technical team to clear your wiring or coding doubts live.
Can I buy the Line Following Robot Kit in Kanpur?
Yes – buy online with fast delivery across India, or pick up directly from the iTechBuilders store in Damodar Nagar, Kanpur.
